HOW TO MEASURE l-shape COVERS

Always measure left to right and measure twice, for accuracy.

 


Step 1: Confirm Your EZ Baseboard Cover will fit:

Floor to top of Fintube | EZ Baseboard Heater Covers
Step 1: Floor to top of Fintube

 

Measure the height from the floor to the top of the metal wall plate.

Any measurement greater than 7 3/8″ inches (188)mm will fit our standard cover.

Any measurement greater than 9 3/8″ inches (238)mm will fit our tall cover.

 

Fin Tube Height | EZ Baseboard Heater Covers
Step 2: Bottom of Fintube to Top

 

Measure from the bottom of the finned tube heating element to the top of the metal wall plate,

A measurement of 5 1/2″ to 6 3/4″(140 mm – 172 mm) will fit our standard cover.

A measurement of 7 1/2″ to 8 3/4″(191 mm – 222 mm) will fit our tall cover.  

 

Depth | Measure | EZ Baseboard Heater Covers
Step 3: Back Wall to Front of Fintube

 

Measure the distance from the wall or the metal wall plate attached to the wall, to the outside of the finned tube heating element.

Any measurement less than 3 1/8″ (76mm) inches from the wall will fit our standard cover.

Any measurement less than 3 1/8″ (76mm) inches from the wall will fit our tall cover.

 

 


Step 2: DOWNLOAD & PRINT THE INSTRUCTIONS AND WORKSHEET:

Click on the photo to download and print the worksheet or scroll down and click the button to download and print the worksheet.

Inside Corner Radiator Going Wall to Wall | EZSnapBaseboardHeaterCovers
Wall to Wall
NO SPACES ON EITHER SIDE

Measure the left side from corner A to corner B (see diagram below).  Then subtract 3 inches for the 90 degree inside corner, then subtract another ½ inch (to allow for wiggle room when installing your new covers.)  Repeat for the right side if also wall to wall.  You need to subtract a total of 3 ½ inches from each side that is wall to wall.  Choose your end caps.

Download & Print

 

L-Shaped Cover with Outside Corner Ending at Wall | EZSnapBaseboardHeaterCovers

 

Outside to Endwall

L-SHAPED OUTSIDE CORNER RADIATORS ENDING IN THE CORNER OF THE WALL

Measure from outside corner of the wall to the corner of the wall, then subtract 1/2" (to allow for wiggle room wheen installing your new covers.)

Download & Print

 

L-Shape Corner Radiator Ending in the Middle of a Wall | EZSnapBaseboardHeaterCovers
Middle of a Wall
INSIDE CORNER TO MIDWALL

Measure the left side from the corner of the wall to the end of the unit with ends attached.Then subtract 3 inches for the 90 degree inside corner, then subtract another ½ inch (to allow for wiggle room when installing your new covers.)  Repeat for the right side.  You need to subtract a total of 3 ½ inches from both left and right sides. Choose your end caps.

 

L-Shaped Outside Corner Ending in the Middle of the Wall | EZSnapBaseboardHeaterCovers
Outside Corner to Midwall
ONE SIDE HAS SPACE AND THE OTHER SIDE DOES NOT
 
L-Shaped outside radiators ending in the middle of the wall: 

Measure from outside corner of the wall A to the end of the radiator unit with end caps attached B, then subtract ½” (to allow for wiggle room when installing your new covers.)
 

Download & Print

 

CONTACT US

1080 Bassett Rd Unit D,
Westlake, OH 44145 USA
FAX: 888-717-9751
© , EZBaseboardHeaterCovers.com Powered by Virteomvirteom.com