How to measure the depth of your baseboard heater covers

Always measure left to right and measure twice, for accuracy.

Step 1: Confirm Your EZ Snap Baseboard Cover will fit:

Step 1: Floor to top of Wall Plate

Measure the height from the floor to the top of the metal wall plate. Any measurement greater than 7 3/8" inches (188 mm) will fit our standard cover. Any measurement greater than 9 3/8" inches (238 mm) will fit our tall cover.

Step 2: Bottom of Fintube to Top of Wall Plate

Measure from the bottom of the finned tube heating element to the top of the metal wall plate, A measurement of 5 1/2" to 6 3/4" (140 mm - 172 mm) will fit our standard cover. A measurement of 7 1/2 to 8 3/4" (191 mm - 222 mm) will fit our tall cover.

Step 3: Back Wall to Front of Fintube

Measure the distance from the wall or the metal wall plate attached to the wall, to the outside of the finned tube heating element. Any measurement less than 3 1/8" (76mm) inches from the wall will fit our standard cover. Any measurement less than 3 1/8" (76mm) inches from the wall will fit our tall cover.

How to measure the length of your baseboard heater


 

Straight Lengths measure instructions

Step 2: Download & Print the Instructions and Worksheet:

Click on the photo to download and print the worksheet. 

Always measure left to right and measure twice, for accuracy. 

Wall to Wall

NO SPACE ON EITHER SIDE Measure from wall to wall and subtract 1/2 inch (to allow for wiggle room when installing your new covers.) The endcaps can be pulled or slid 1/2 inch outward on either end to fit your existing length requirements. Choose 2 flush to wall end caps.


Download Worksheet & Print

Middle of a Wall

SPACES ON BOTH SIDES Measure the overall length of the existing unit with ends attached then subtract 1/2 inch (to allow for wiggle room when installing your new covers.) The endcaps can be pulled or slid 1/2 inch outward on either end to fit your existing length requirements. Choose 2 Closed or Open-end caps.


Download Worksheet & Print

Corner to Mid Wall

ONE SIDE HAS SPACE & OTHER SIDE DOES NOT Measure from the corner to the end of the unit with ends attached then subtract 1/2 inch (to allow for wiggle room when installing your new covers.) The endcaps can be pulled or slid 1/2 inch outward on either end to fit your existing length requirements. Choose 1 Closed or Open-end & 1 flush to wall end cap.


Download Worksheet & Print

L-Shape measure instructions

Step 2: Download & Print the Instructions and Worksheet:

Click on the photo to download and print the worksheet. 

Always measure left to right and measure twice, for accuracy. 

Wall to Wall

NO SPACES ON EITHER SIDE Measure the left side from corner A to corner B (see diagram below). Then subtract 3 inches for the 90 degree inside corner, then subtract another 1/2 inch (to allow for wiggle room when installing your new covers.) Repeat for the right side if also wall to wall. You need to subtract a total of 3 1/2 inches from each side that is wall to wall. Choose your end caps.


Download Worksheet & Print

Middle of a Wall

INSIDE CORNER TO MIDWALL Measure the left side from the corner of the wall to the end of the unit with ends attached.Then subtract 3 inches for the 90 degree inside corner, then subtract another 1/2 inch (to allow for wiggle room when installing your new covers.) Repeat for the right side. You need to subtract a total of 3 1/2 inches from both left and right sides. Choose your end caps.


Download Worksheet & Print

Outside Corner to Midwall

ONE SIDE HAS SPACE AND THE OTHER SIDE DOES NOT L-Shaped outside radiators ending in the middle of the wall: Measure from outside corner of the wall A to the end of the radiator unit with end caps attached B, then subtract 1/2" (to allow for wiggle room when installing your new covers.)


Download Worksheet & Print

Outside to Endwall

OUTSIDE TO ENDWALL L-SHAPED OUTSIDE CORNER RADIATORS ENDING IN THE CORNER OF THE WALL Measure from outside corner of the wall to the corner of the wall, then subtract 1/2" (to allow for wiggle room wheen installing your new covers.)


Download Worksheet & Print

What is the cost?

Standard Height Covers

Part Price per part
Covers $21.95 per foot
Endcaps and Corner Caps
(except 90º outside corner)
$22.95
Mesh Coupler $16.95
90º outside corner $35.95

 

Tall Height Covers

Part Price per part
Covers $27.50 per foot
Endcaps and Corner Caps
(except 90º outside corner)
$28.75
Mesh Coupler $21.25
90º degree outside corner $44.95

 

Brackets

Part Price per part
Wall Contraption $8.50
Wall Widget $3.50
Floor Fidget $4.50

 

 


Purchase your ez snap baseboard heater covers

Let EZ Calculator Price your Kit

Purchase a Complete Kit

Purchase Individual Parts

Purchase Individual Parts

CONTACT US

1080 Bassett Rd Unit D,
Westlake, OH 44145 USA
FAX: 888-717-9751
© , EZBaseboardHeaterCovers.com Powered by Virteomvirteom.com