How to Measure 45 degree, U-Shape and Z-Shape Covers


Step 1: Confirm your EZ Snap Baseboard Cover will fit:

Total Height of Baseboard | EZ Baseboard Heater Covers
Step 1: Floor to top of Fintube

Measure the height from the floor to the top of the metal wall plate.

Any measurement greater than 7 3/8″ inches (188) mm will fit our standard cover.

Any measurement greater than 9 3/8″ inches (238) mm will fit our tall cover.

 

Fin Tube Height | EZ Baseboard Heater Covers
Step 2: Bottom of Fintube to Top

Measure from the bottom of the finned tube heating element to the top of the metal wall plate,

A measurement of 5 ½″ to 6 ¾″ (140 mm – 172 mm) will fit our standard cover.

A measurement of 7 ½″ to 8 ¾″ (191 mm – 222 mm) will fit our tall cover.  

 

Depth of Baseboard Heater Covers | EZ Baseboard Heater Covers
Step 3: Back Wall to Front of Fintube

Measure the distance from the wall or the metal wall plate attached to the wall, to the outside of the finned tube heating element.

Any measurement less than 3 1/8″ (76mm) inches from the wall will fit our standard cover.

Any measurement less than 3  1/8″ (76mm) inches from the wall will fit our tall cover.

 

 


Step 2: Download & Print the Instructions and Worksheet:

Click on the photo to download and print the worksheet or scroll down and click the button to download and print the worksheet.

45 Degree Corners
45 DEGREE OR BAY WINDOW RADIATORS
 
We recommend that you order covers a little longer than normal and cut them on site, as there are many opportunities for mistakes in measuring and installation. By cutting on site you can fit and cut to fit. The covers can be cut with a good quality jigsaw and a fine metal cutting blade.
 

 

U-Shape
TWO SIDES HAVE SPACES AND WALL TO WALL SECTIONS

Left leg - measure from the corner out to the to the end of the radiator subtract 3” for the corner and ½” (to allow for wiggle room when installing your new covers.)

Center leg - measure from corner to corner and subtract 3” for each corner a total of 6”

Right leg - measure from the corner out to the to the end of the radiator subtract 3” for the corner and ½” (to allow for wiggle room when installing your new covers.)
 

Download & Print

 

Z-Shape
TWO SIDES HAVE SPACES AND WRAP AROUND WALL TO WAL SECTIONS
 
Measure frrom the corner of the wall to the outside corner. Subtract 3" for the 90 degree corner (for both left and right legs). Measure from the corner to the end of the unit with end caps on. Subtract 3" for the 90 degree corner then subtract 3" for wiggle room.
 

 

CONTACT US

1080 Bassett Rd Unit D,
Westlake, OH 44145 USA
FAX: 888-717-9751
© , EZBaseboardHeaterCovers.com Powered by Virteomvirteom.com